The forefront for creating

04 August 2021

The forefront for creating

ALUMINUM RECYCLING: THE FOREFRONT FOR CREATING

COMPETITIVE BUSINESS

Magaldi Ecobelt® technology to improve aluminum recycling by allowing to re-use thermal energy from upstream processes

Magaldi repeated the successful experience achieved at
Novelis’ Nachterstedt Recycling Center, by supplying its
Ecobelt® technology to handle hot aluminum shreds to
Logan recycling plant in Kentucky.
With a continuous production of 20 t/h for the each line,
the Ecobelt® systems connect in a reliable way two delacquering
kilns with the downstream furnaces

 

SECONDARY ALUMINUM SMELTING

Secondary Aluminum Smelting is the process of recycling aluminum scrap into aluminum that can be used
and recycled over and over again in a true closed loop process.
The increased adoption of recycled aluminum has created significant economic and environmental benefits
for both industry and consumers. Currently, more than 90% of aluminum used in automotive and construction applications is recycled and the trend is constantly growing also in other industrial sectors because of the economic and environmental benefits it provides. In fact, secondary aluminum production not only needs less energy (recycling scrap aluminum requires only 5% of the energy used to make new aluminum), it also reduces landfill waste and greenhouse gas emissions.
Once collected and sorted, aluminum scrap is decoated-  typically through the use of a rotary kiln – to remove coatings and contaminants. From rotary de-coaters, hot shreds (at about 500 °C) are then conveyed to the recycling furnace and turned into molten aluminum to be casted into ingots or billets, ready for subsequent processing into new aluminum products.
 

THE ECOBELT® TECHNOLOGY TO HANDLE HOT RECYCLED ALUMINUM

Magaldi has developed a system able to reliably handle hot shreds (at about 500°C), connecting the rotary de-coater with the downstream melting furnace. The Ecobelt® is a steel belt conveyor, completely enclosed in a steel casing, able to handle hot materials with aggressive chemicals, heavy or sharp products, ensuring a safe and environmentally-friendly operation. Its ability to guarantee high reliability makes it the appropriate solution for secondary smelters and aluminum recycling facilities.
Usually employed to convey hot shreds, conventional apron-based conveyors enclosed in casings are not able to avoid heat dispersion. Moreover, directly exposed to high temperatures and dusty material, bushings and chain links need frequent greasing to avoid excessive wear thus requiring frequent shutdowns to open the casing and lubricate. In addition, chain links and guide rails often break due to dust accumulation on the bottom of the conveyor. Unlike apron-conveyors, the Ecobelt® prevents dust dispersion into the environment and ensures the lowest temperature drop thus allowing to re-use thermal energy released from upstream processes. In fact, its core technology is the Superbelt®, a steel belt conveyor made of partially overlapping steel pans bolted on a steel double-wire mesh, that form a virtually sealed belt conveyor. Although enclosed in a steel casing, maintenance activities are very easy: all bearings are installed outside to allow trouble-free maintenance at any time and lubrication with the belt in operation. Furthermore, the absence of chains, pinions and sprockets guarantees a low wear and tear and a longer service life.
 

img_20181031_172301.jpg

THE EXPERIENCE AT LOGAN ALUMINUM

RECYCLING CENTER

The successful experience achieved by Magaldi at Novelis Sheet Ingot GmbH paved the way for a new challenging experience in the aluminum recycling industry. In September 2016, Logan Aluminum Inc. – leading manufacturer of flat rolled aluminum sheet for the beverage can market in U.S. - awarded Magaldi with a contract for the turn-key installation of a complete Hot Shred Conveyance System for its new Recycling Center located in Russelville, Kentucky. Logan was looking for a dependable technology able to improve all aspects related to safety, process capability and spare parts requirements. The attempt to use a chain conveyor had not been successful due to the inability to perform according to the plant requirements. After simulating the plant operational conditions so to better customize the offer, Magaldi signed a contract to supply two Ecobelts® to convey 40 t/h of hot aluminum shreds from the delacquering kilns to the downstream melting furnaces. The first Ecobelt® became operational on Summer 2017 while the second conveyor on October 2018. In the same year, two further Ecobelt® systems were commissioned to handle up to 18 t/h each of aluminum at 560°C.

Ecobelt® Length: 44.000 mm
Width: 800 mm
Height: 5.000 mm
Capacity: 16 t/h
Temperature: 580°C
Handled Material: Aluminum shreds
Ecobelt® Length: 7.045 mm
Width: 800 mm
Height: 3.405 mm
Capacity: 18 t/h
Temperature: 560 °C
Handled Material: Aluminum shreds
Ecobelt® Length: 7.045 mm
Width: 800 mm
Height: 3.405 mm
Capacity: 18 t/h
Temperature: 560 °C
Handled Material: Aluminum shreds
 

News

Third generation at the helm of the company: Paolo Magaldi is the new CEO

22 November 2022

Paolo Magaldi is the new CEO of Magaldi Power, the world leader in the design and production of systems for handling materials at very high temperatures in the industrial sectors (metallurgical, iron and steel, metalworking, cement, energy).

Read More

News

Meet Magaldi at Ecomondo! Booth #A3010

28 October 2022

Join us at Ecomondo 2022 (8th -11th November)! Booth #A3 010!

Read More

News

Cement plants: a bulk material handling breakthrough

26 October 2022

Don't miss the article published by Dry Bulk Magazine about the revolutionary Ecobelt B bucket conveyor for clinker transport!

Read More

News

Webinar: The role of concentrated solar power in the national energy mix

21 October 2022

The webinar recording and the papers presented by the distinguished speakers are now available online. Don't miss them!

Read More