The material spillage from conveyors could be a quite arduous problem to solve. A solution to keep clean the plant areas, avoiding the environmental pollution and reducing the operational costs, is the Magaldi O-Chain®.
The Magaldi O-Chain® is a new chain conveyor, completely enclosed in an independent casing. Its function is to receive the fine residuals, taken from the conveyor bottom by the cleaning device, and to reload them onto the above said conveyor. Any problem, caused from material spillage to the industrial plants, is eliminated.
The Magaldi O-Chain® is tailored around the main conveyor and runs in a direction perpendicular to the conveyor itself. All bearings are installed outside the casing, allowing trouble-free inspection at any time and lubrication with the chain in operation. The Magaldi O-Chain® can continuously work for years with reduced O&M costs.
It can be installed behind the loading point, toward the tail section, or in one or more intermediate sections of the main conveyor in order to satisfy different needs of fine residual recovery. Furthermore, the special bucket design assures that the material spillage is completely reloaded onto the conveyor.
The Magaldi O-Chain® offers a reliable system to keep clean the environment under and around the conveyors. It allows to recover any type of bulk, abrasive, grain or fine residuals in a completely enclosed casing.